Check the length of the lower A-arm. The A-arms can vary in length by up to
1/2". Some 1994 purchasers had the same problem as many of them were built
with a batch of lower A-arms that were not autoX friendly (different
subcontractors apparently used different jigs). Measure and compare with
another car that can get good alignment. Then buy another A-arm that is
longer if yours comes up short. See Miata.net/faq/
Randy
<< I aligned my `99 10th Anniversary Edition and achieved similar result for
the rear. On the front I can get 1/2 degree negative on the drivers side
and 3/4 degree negative on the passenger side. Your cars sounds like it
may have sustained some frame damage in an accident.
>>
|