Howdy,
On Tue, 20 Jul 1999, Gerald Chen wrote:
> I heard that 225's all the way around didn't work on a Neon. They do fit,
> but supposedly they rub against the trailing arm under hard cornering -
> can anyone confirm?
I've done this. With 34mm offset wheels (i.e. machined 33mm AR25's), zero
rear toe and around -0.5 deg camber (guess) the 225's just barely rub
under hard cornering. I've also seen Mark Daddio run 'em (and I suspect
this is who Mike was aluding to, but I'm not sure). He was running 35mm
offset wheels (guess) with 0 deg. camber and a lot of toe out.
If you're gonna try it, you're gonna want at least 35mm offset wheels and
more than likely will need to add toe out and/or negative camber to get
clearance. Its not worth the alignment compromises to me.
Mark
|