autox
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: Need source for 2.5" diameter 18 Ga pipe

from [Jeremy L. Schuster] [Permanent Link][Original]
To: "Jerome Soh" <jerome@fortunebuilders.net>,
Subject: Re: Need source for 2.5" diameter 18 Ga pipe
From: "Jeremy L. Schuster" <jlschuster@home.com>
Date: Tue, 18 May 1999 18:26:08 -0500 
www.burnsstainless.com should have what you need.

Jeremy L. Schuster

> Looking for a source for 2.5" diameter 18 Ga aluminized or mild steel
> straight pipe, mandrel J-bends or 45 deg. bends, OR.... if anybody makes
> something in ALUMINUM.... any help appreciated. Thanks in advance.
> 
> Regards,
> 
> Jerome
> 
> Step By Step Home Based Business
> http://www.fortunebuilders.net
> FREE Honda Classifieds!
> http://www.sohfast.com/classified.htm
> 
>
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Need source for 2.5" diameter 18 Ga pipe, Jerome Soh
Next by Date:  Re: Peru C Stock results, Eric W. Clements
Previous by Thread:  Need source for 2.5" diameter 18 Ga pipe, Jerome Soh
Next by Thread:  RE: Need source for 2.5" diameter 18 Ga pipe, Miller, Don
Indexes:  [Date] [Thread] [Top] [All Lists]