2) You must use an OEM stock clutch if you wish to remain ES.
3) Try Carbotech pads. Many Honda Auto-x guys use them.
http://www.carbotecheng.com/
Regards,
Alan
'93 ES delSol
> -----Original Message-----
> From: Chad Bersche [SMTP:chad@michelob.wustl.edu]
> Sent: Wednesday, May 05, 1999 2:24 PM
> To: autox@autox.team.net
> Subject: '93 Integra queries
>
> I'm seeking some advice <snip>
>
> 1) Who has good replacement cat-back exhaust systems for the Integra
> that will fit the stock mountings? I'm not looking for loud, since
> I do drive this thing every day - and if replacing it with something
> other than a stock muffler isn't going to get me much, so be it,
> I'll just get rid of the rusting one and put another similar to it
> on.
>
> 2) What type of clutch assembly should I consider putting in to replace
> the stock one? It's not too bad yet, but I'm starting to feel that
> the high gears aren't as responsive as they were, and there's more
> noticeable slip in the low gears.
>
> 3) What brakes would I want to look at for replacement when the ones I
> have start to go?
>
> I appreciate any tips/pointers/advice that might be offered!
>
> -- Chad
>
> ---
> Chad A. Bersche - chad@michelob.wustl.edu
> '93 Acura Integra GS
>
|