That's about the way it is on the Tiger, but it does open enough to get the
top up and down. OK for the Tiger, I know, but the soft top mechanism for
the Series II is substantially different.
Ramon
-----Original Message-----
From: Gary [mailto:gstrom99@joimail.com]
Sent: Wednesday, November 18, 2009 7:33 PM
To: rspontelli@earthlink.net; alpines@autox.team.net
Subject: Re: [Alpines] AutoPower roll bar clearance
That's what I do on my Series II. I built the roll bar myself, so I wasn't
going to chime in in case the Autopower one is different. I modified the
side covers, so they don't really latch in, they just sit there, when
closed. The back panel is the pain for me; I can only open it halfway at
most.
Gary Strom
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Alpines@autox.team.net
http://autox.team.net/mailman/listinfo/alpines
http://www.team.net/archive
|