alpines
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[Alpines] SV gauge Q. Re: Bill Mounce

from [phil] [Permanent Link][Original]
To: "alpines-digest@autox.team.net" <alpines@autox.team.net>
Subject: [Alpines] SV gauge Q. Re: Bill Mounce
From: "phil" <philipreddy@fuse.net>
Date: Sat, 7 Jun 2008 22:23:49 -0400 
>From the British Screw Thread Std No. 93. # 2 Dia =0.185 " & No. # 3 =0.161"

Then there are the Brit. Whitworth course and fine in both cases there is 3/16
Dia Thd.  Course = 24 T P Inch, Fine = 32 T P Inch.

Phil
_______________________________________________
Support Team.Net  http://www.team.net/donate.html

Alpines@autox.team.net
http://autox.team.net/mailman/listinfo/alpines

http://www.team.net/archive
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
  • [Alpines] SV gauge Q. Re: Bill Mounce, phil <=
Previous by Date:  [Alpines] SV Oil gauge question, Bill Mounce
Next by Date:  [Alpines] Another Get Smart article (no mention of the car), TIGEROOTES
Previous by Thread:  [Alpines] SV Oil gauge question, Bill Mounce
Next by Thread:  [Alpines] Another Get Smart article (no mention of the car), TIGEROOTES
Indexes:  [Date] [Thread] [Top] [All Lists]