Allan, unfortunately not! The shaft of the distributor is keyed, but not the
housing. You can rotate the housing while the shaft is inserted into its
counterpart in the engine. By turning the housing you'll destroy the timing
and you'll have to adjust it again.
Eric
http://brits-n-pieces.com
-----Urspr|ngliche Nachricht-----
Von: alpines-bounces+lists=brits-n-pieces.com@autox.team.net
[mailto:alpines-bounces+lists=brits-n-pieces.com@autox.team.net] Im Auftrag
von tom.hill@att.net
Gesendet: Dienstag, 30. Oktober 2007 13:43
An: Allan Ballard; 'Alpines'
Betreff: Re: [Alpines] putting in a distributor
Yes it is. The distributor has a keyed drive that only allows it to be
installed one way.
-------------- Original message from "Allan Ballard"
<aballard@ix.netcom.com>: --------------
> I am looking at replacement of a distributor (SV engine).
>
> The engine is in time; is this just a matter of lifting out
> The old distributor and inserting the replacement?
>
> Thanks in advance,
>
> Allan
> Atlanta, GA
_______________________________________________
Alpines@autox.team.net
http://autox.team.net/mailman/listinfo/alpines
|