You might try a,,, water soft plug. The type that has a rubber fitting and a
bolt/nut afair. Insert it into the hole and tighten the nut. It works
similar to an old type of vaccume bottle plug. This works under a lot of
pressure and easy to fit. Or if you can get a pipe tap to fit it, you may
thread it and put in a pipe plug..
Chuck
> Anybody have a solution for a plug or seal for the steering box on the
> forward side of the box. It appears about just under 1 in diameter. Ive
> got some gerry-rigged rubber boot in there that leaks/oozes grease.
> Thanks.
> _______________________________________________
_______________________________________________
Alpines@autox.team.net
http://autox.team.net/mailman/listinfo/alpines
|