Does the headlight ground also cause trouble? If so maybe I'd better
take Larry's advice and go for a more secure grounding rather than
splice into the headlight ground.
Frank
-----Original Message-----
From: Larry Paulick [mailto:larry.p@erols.com]
Subject: Re: Front turn signal housing GROUNDING?
Frank one way is to drill a hole through the turn signal housing, put a
screw in with serrated washers on both sides, a nut, and cover the
outside with silicone. Then run this to a good ground, including the
headlights, so this problems never comes up again. I used a screw nut
welded to body around the horn as a good ground.
Larry
|