My B9410133 is round corner. You must have access to some info that I
haven't seen yet. My info indicates that of the 12,400 series IV's
produced, 4,500 were IVa's. Square corner hoods didn't start showing up
until around B9410322, approximately 1,500 from the end of production of
series IV's. But I don't have any info on the CKD units, B945---- and
B946----, maybe that is where the difference is.
Russ
----- Original Message -----
From: "Louis & Laila" <bwana@c2i2.com>
To: "Russ Eshelman" <RussE@Firstva.com>; <alpines@autox.team.net>
Sent: Saturday, February 16, 2002 8:15 AM
Subject: Re: series IV
> True. to a certain extent. They started ccutting costs in the middle of
> production. They made another 5 thousand series 4's with the square
corners,
> so it wasn't a case of left over stuff getting used up. The transmissions
> changed at this time also.
> ----- Original Message -----
> From: "Russ Eshelman" <RussE@Firstva.com>
> To: <alpines@autox.team.net>
> Sent: Sunday, February 17, 2002 4:02 PM
> Subject: Re : series IVtimes also.
>
>
> > Don't want to pass up a chance to show "my" ignorance, I thought B940's
> > were IV's with non-synchro tranny and B941's were IVa's with all synchro
> > tranny. I also thought Square corner / round corner mix was to use what
> > ever was left over while in transition to series V square corners?
> > Russ
> > -
|