I had assumed that the B-Post Cap screws were just Chrome plated, pan head
Phillips machine screws, I was going to use polished stainless. Perhaps
I've assumed wrong???
Frank
B9471116
-----Original Message-----
From: Paul Heuer [mailto:paul.heuer@dsto.defence.gov.au]
Sent: Tuesday, August 07, 2001 3:59 PM
To: Fmarrone@turinnetworks.com
Cc: alpines@autox.team.net
Subject: Re: trim bits & b-post screws
Thanks Frank,
I have one in reasonable nick, so if anyone has ONE good one let me know
before Frank! (Heh, heh, kidding).
Nobody has anything to say about the screws for the B-post?
Cheers,
Paul.
Fmarrone@turinnetworks.com wrote:
>
> DP66 are not in stock. If anyone has a decent used set they want to
> part with let me know. If you have two sets let Paul know too. If
> Rick gets them back in stock again let us all know.
>
> Frank
> B9471116
>
> -----Original Message-----
> From: Paul Heuer [mailto:paul.heuer@dsto.defence.gov.au]
> Sent: Monday, August 06, 2001 6:17 PM
> To: alpines@autox.team.net
> Subject: trim bits & b-post screws
>
> Does anyone have a Sunbeam Specialties catalog handy?
> I need the current price of:
> IP59 (plastic rivets for soft-top cover trim)
> DP66 (door closing pads, mount under the B-post cover)
>
> Also, in reference to the B-post cover (the chrome part that sits on
> top
> of the B-post at the back end of the door opening), I need a couple of
>
> each type of the screws that hold the B-post cover in place.
> Does Rick sell these? Cost and part number?
> If not, does any kind soul on the list have a couple of spares?
>
> Cheers,
> Paul.
> Alpine Series 3 ST.
--
Paul Heuer paul.heuer@dsto.defence.gov.au
Defence Science and Technology Organisation Phone: +61 8 8259 5109
Air Operations Division - Salisbury FAX : +61 8 8259 5507
PO Box 1500, Salisbury, South Australia, 5108 Mobile: 0417 209 486
|