The nut size is 3/4 Whitworth or 7/8 BS. 33.2mm It's a classic vintage =
British size from way back.
Measured with a vernier gauge 1 5/16" is larger, or 33mm might fit =
tightly.
Dang! Most sockets sets stop 1 size short.......but not Snap-On
Best to get the right tooling, it comes in handy elsewhere.
Like on the steering box for the drop-arm nut and the steering wheel =
itself and again for the differential pinion nut.
Often a combination wrench will not access these nuts, a deep offset =
ring spanner ( Box wrench ) is best.
Happy wrenching, save knuckle busting wherever possible.
Peter Noonan
|