They should move in sync with each other. Check your throttle link between
the carbs, if there is any play in the linkage, you'll need to adjust it so
the throttles open at the same time. There is a tool called Unisync that's
been mentioned on the list that can help adjust the carbs. It's also
possible that you might have worn throttle shafts/bushings and that could
cause this problem also. Unfortunately, that is not an easy fix.
----- Original Message -----
From: "Brent Kasl" <kasl100@navix.net>
To: <alpines@autox.team.net>
Sent: Sunday, July 30, 2000 12:27 PM
Subject: Stromberg 150's
> Viewing the carbs as they operate with the air filter off, our S5 front
> carb has a piston that moves up and down with throttle movement. The
> back carb does not. Are they supposed to be in synch and do the same
> movement? Since these do not, what needs to be done to correct? Thanks
> Brent
>
>
|