I have a Porsche 911 with late model wheels, there are wheel adapters
made for this type of application and they are hub centric billet
aluminum spacers drilled to match your bolt pattern. There are 8 holes
4 for your lugs that you bolt the spacer to and an additional 4 which
have new studs pressed into... the ones I have are 1" thick but come in
a wide variety of sizes and a VERY strong... If you have any questions
email me...
Aaron
67 Alpine
86 911
>-----Original Message-----
>From: Scott Donnelly [SMTP:oharajem@free.midcoast.com]
>Sent: Friday, July 21, 2000 1:56 PM
>To: Alpine list
>Subject: VB alloys - spacers and lugs
>
>Chris, I have the spacers as well but was uncomfortable with the length
>of
>the wheel studs - I was only getting about three threads worth of grip
>from
>the lug nuts (I wrapped them with teflon tape as an indicator). Are you
>using VB lugs or another type?
>Scott
>
|