I have been following this thread with much interest (and amusement). I
have a TR6, early PI cam, 9.5 cr, dual exh, and K&N air filters. Moss UK
reccomends BAE needles with 8oz springs. I am using BAG needles,which are
slightly leaner than BAE from #3-#6, but are richer from #6 to the end. The
leds
and the af meter (narrow band) all go out at about 2200 rpm in 4th and the
plugs are quite light in color. Performance seems ok with no lean miss. I
haven't detected any difference between the red or yellow springs on the
af meter. Anyway, what needle are you using?
I also was curious about piston lift under load and used graduated rods in
the dash pots with a cable operated digital camera to snap some photos at
various speeds. The things we do for entertainment in retirement.
Berry Price
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|