Hello,
I am trying to remove the pulley/fan from my 72 Alernator. It is a Delco/Remy
version.
The nut is a 15/16 around what looks like to be a 5/16 allen screw.
I put the pulley in a vice and the nut turns but does not loosen.
I then attached a 5/16 allen socket to the allen screw put that in a vice and
tried to turn the 15/16 nut with a very large box wrench and BFH.
The 15/16 nut does not move! I am afraid of breaking the allen socket if I get
a bigger hammer.
I am trying to turn the nut counter - clockwise. Is that correct?
Any other methods to remove that nut, bolt so the pulley / fan can be removed?
Thanks,
Bob
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|