Hi,
Speaking of Pertronix... has anyone tried using the new Ignitor II?
I switched to the Ignitor on my street car some time ago (maybe two years
ago, I forget) but the one thing I don't like is that the dwell is fixed
at 35 degrees and I'm used to using 42 degrees for various reasons.
At any rate the P II literature that I've seen is sketchy regarding the
dewll angle for the newer unit, and before I plunk down another $100 or
so, I wanted to know if anyone has direct experience that they might
share.
I promise I'll "share", one way or the other (input from others or on my
own).
Still trying to decide - 13:1 motor, new cam in old motor, new cam and
1.65:1 roller rockers in old motor, carillo rods... there are so many
choices.
:-)
rml
---------------------------------------------------------------------------
Bob Lang NER/SCCA | This space for rent
Solo Chair 2008 TR6 40 F Prepared | Triumph!
Voice:781-438-2568 FAX: 617-258-9535 | Cell: 339-927-4489
---------------------------------------------------------------------------
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|