6pack
[Top] [All Lists]

Re: [6pack] Crimping Bullet connectors

To: "'John Mitchell'" <jmitch@snet.net>, "'6-Pack'"
Subject: Re: [6pack] Crimping Bullet connectors
From: "Bob Danielson" <75TR6@tr6.danielsonfamily.org>
Date: Sun, 11 Jan 2009 10:20:48 -0500
John,
Here's a pretty good picture of a bullet crimped with the tool
http://tinyurl.com/98mxxy You do have use the special bullets that can be
crimped and also match up with the wire size you're using. I also soldered
them because it was so easy to heat the bullet, touch the solder to end of
the bullet and watch it sucked into the bullet. But I was working with Dan's
wire which can take a mini butane torch without melting. I stink with a
soldering iron!

Bob

Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection
Toyota 5 Speed & Nissan LSD
http://tr6.danielsonfamily.org 

-----Original Message-----
From: 6pack-bounces@autox.team.net [mailto:6pack-bounces@autox.team.net] On
Behalf Of John Mitchell
Sent: Sunday, January 11, 2009 8:28 AM
To: 6-Pack; BobDanielson; triumphs@autox.team.net
Subject: [6pack] Crimping Bullet connectors

     Just a quick wiring question.  I have the lucar bullet type crimping
tool from British Wiring.  Do I crimp back by where the wire enters the
connector, or just behind the ball on the end?  The first couple I've tried,
I crimped back by the wire, and it crushed the connector completely.  Is it
worth soldering after crimping?  I'm installing a daytime running light
controller because I tend to leave the lights on when driving with them on
during the day.  It activates the high beams at 75% power whenever the
ignition is on and I'm 
wondering if my Lucas 18ACR will keep up.  Thanks  fan any help.   John 
Mitchell  76 TR6
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack

http://www.team.net/archive

You are subscribed as 75tr6@tr6.danielsonfamily.org
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack

http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>