Kevin, hopefully someone with an A type will chime up shortly with the actual
info but from looking at the circuit diagram for the early cars you could tie
the white wire to the fuse box green circuit so that the relay is energized
only when the ignition is on and perhaps tie the brown wire (which is the
switched power to the solenoid) to the purple circuit. I assume that the
relay is just there to protect the OD switch and not because there is so much
current that it needs a dedicated feed from the battery so in theory the brown
wire could be attached to any fused power source and I would elect for the
least loaded circuit.
Stan
-----Original Message-----
From: 6pack-bounces+stan.foster=hp.com@autox.team.net
[mailto:6pack-bounces+stan.foster=hp.com@autox.team.net] On Behalf Of Dr L.
Kevin McNelis
Sent: Friday, June 27, 2008 11:01 AM
To: 6pack@autox.team.net
Subject: [6pack] "A" OD elect question
Put in an entire new wiring harness. But, I have looked in all my
sources, and I can not for the life of me find out where the two OD (A
type) power wires plug in. The ones that terminate at the fuse box-
one white, one brown. Which fuses do these get attached to? Which two
circuits?
Thanks for the collective knowledge.
Kevin
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|