Thanks. These, of course, are wedge-based lamps, requiring replacement of the
connectors/sockets as well, to accommodate them.
Also, an electronic flasher is required, it says (in lieu of our thermal
flashers) and there are many types available.
http://www.tricoproducts.com/index.cfm?location_id=129
Dave
---- TR6UO@aol.com wrote:
> HD Lighting version:
>
> Standard Base / Single Contact Bulb - White 1156 Style Direct
> Replacement LED Bulb
> Related Products: _Standard Base / Single Contact Bulb - Amber -
> #HD1156YSD_
(http://heavy-dutylighting.com/product_detail.php?uuid=a2E8EB9E0E)
> _Standard Base / Two Contact Bulb - Amber - #HD1157YSD_
> (http://heavy-dutylighting.com/product_detail.php?uuid=aFB26DAAD0)
_Standard Base / Two Contact Bulb -
> Red - #HD1157RSD_
> (http://heavy-dutylighting.com/product_detail.php?uuid=aA0F950DB4) _Wedge
Base / Single Contact Bulb - Amber - #HD3156YSD_
> (http://heavy-dutylighting.com/product_detail.php?uuid=a27B28BAD5) _Wedge
Base / Single
> Contact Bulb - White - #HD3156WSD_
> (http://heavy-dutylighting.com/product_detail.php?uuid=aAADE9C099) _Wedge
Base / Two Contact Bulb - Amber -
> #HD3157YSD_
(http://heavy-dutylighting.com/product_detail.php?uuid=a308B41EC7) _Wedge
> Base / Two Contact Bulb - Red - #HD3157RSD_
> (http://heavy-dutylighting.com/product_detail.php?uuid=aB25D287E1) _Wedge
Base / Two Contact Bulb - White -
> #HD3157WSD_
> (http://heavy-dutylighting.com/product_detail.php?uuid=aF117A5579)
Technical Specifications: LED's - 13 Super Duty Square Diodes
> Width - 0.93"
> Height - 2.0"
> Voltage Range - 7.5 - 14VDC Additional Features: For aftermarket use.
May
> not comply with SAE or U.S. DOT standards. Perfect replacement for most*
> incandescent vehicle lighting. Fit standard vehicle sockets. Super bright
360B0
> light dispersion design.
> *Resistor Statement:
> Since LED bulbs draw much less current then standard incandescent bulbs
some
> vehicle computers may think a bulb is out. If installing LED bulbs in your
> car, truck or motorcycle causes your blinkers to blink fast or causes other
> electrical problems, it may be necessary to install a load resistor to
correct
> these problems.
> *Thermal Flasher:
> LED brake/tail lamps may not work with some older thermal flasher units. An
> LED brake/tail lamp will require an electronic flasher/blinker unit which
is
> commonly available at your local auto parts store.
>
>
>
>
> **************Wondering what's for Dinner Tonight? Get new twists on family
> favorites at AOL Food.
> (http://food.aol.com/dinner-tonight?NCID=aolfod00030000000001)
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|