I'm at the tail end of this conversion now: Toyota 5 speed new pressure
plate and Nissan differential. Herman's 5 sped conversion kit is very
complete (new clutch and TO Bearing included), has excellent directions and
you've got Herman to hold your hand as needed. The only problem I've had is
he supplies a flat faced hydraulic throw out bearing which is used with bent
finger pressure plates. The Sachs PP that I got from Ted Schumacher is a
flat finger PP and they require a curved face TO Bearing. So we're swapping
TO Bearings now. You can follow my progress for all this work at
http://tr6.danielsonfamily.org/60thBirthday.htm
Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection
http://tr6.danielsonfamily.org
-----Original Message-----
From: 6pack-bounces+75tr6=tr6.danielsonfamily.org@autox.team.net
[mailto:6pack-bounces+75tr6=tr6.danielsonfamily.org@autox.team.net] On
Behalf Of j.honor@comcast.net
Sent: Saturday, March 15, 2008 11:40 PM
To: 6pack@autox.team.net
Subject: [6pack] new transmission ideas
springtime with 74- tr-6; comtemplating swaping tranny with new 5 speed
along with clutch and lite flywheel- what has been folks expereince in doing
this and worth results? Thanks as always!
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
You are subscribed as 75tr6@tr6.danielsonfamily.org No virus found in this
incoming message.
Checked by AVG.
Version: 8.0.85 / Virus Database: 269.21.7/1331 - Release Date: 3/16/2008
10:34 AM
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|