Hanger works great. Have 2 doors to prove it. I've done it all kinds of ways
its hangers from now on.
Lou
-----Original Message-----
From: "Joseph Grant" <grant@bowtie6.com>
Date: Sat, 12 Jan 2008 20:59:08
To:"'Bob Danielson'" <75TR6@tr6.danielsonfamily.org>, "'robert
fabie'"<bobfabie@gmail.com>, <6pack@autox.team.net>
Subject: Re: [6pack] window crank removal tool
I have heard another possible way to do this is with a coat hanger. I have
not personally used the coat hanger approach, but it makes sense.
BTW, if you don't have a pair of hemostats in your toolbox (as suggested by
Bob's website) you need to get a set. They are readily available on eBay
and cheap. Great tools to have. I bought both a straight one and a curved
tip...
Joe
'72 TR6 - CC77169
http://www.bowtie6.com/
-----Original Message-----
From: 6pack-bounces+grant=bowtie6.com@autox.team.net
[mailto:6pack-bounces+grant=bowtie6.com@autox.team.net] On Behalf Of Bob
Danielson
Sent: Saturday, January 12, 2008 20:51
To: 'robert fabie'; 6pack@autox.team.net
Subject: Re: [6pack] window crank removal tool
Bob,
There's a good picture of the pin you have to remove here
http://tr6.danielsonfamily.org/WindowChannel.htm As someone mentioned it
comes out with a thin punch/drift. My pictures show the re-installing
process.
Bob
Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection
http://tr6.danielsonfamily.org
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
You are subscribed as lfm614@aol.com
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|