Ditto, you can also order them separetely thay are about $1 or less each. As
Greg said you have to ask for the part number(s). I would order their kit as I
have heard of casting problems causing the others to leak.
Lou
-----Original Message-----
From: Greg Bengeult <gregbengeult@comcast.net>
Date: Mon, 17 Dec 2007 15:36:35
To:6pack <6pack@autox.team.net>
Subject: Re: [6pack] Spin-On Adapter
Not exactly true. A couple of years ago I was rebuilding my engine and
needed a new set of seals for the adapter. I called the Roadster
Factory and talked to someone very helpful (Dave maybe?). They do stock
a kit with both of the seals, but it didn't show up in any catalogs at
that time. Can't say whether it's a catalog item now or not.
Greg Bengeult
Foster, Stan wrote:
>
> 2. Nobody in the US sells replacement rubber seals so if in two years you need
> to take it off for some reason you will be challenged to find replacements as
> none of the many outfits that sell the adapter sell the seals and Rimmer
> charges $20 plus shipping from the UK for them. The reason for this omission
> is one of the many mysteries in life.
>
> Stan
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
You are subscribed as lfm614@aol.com
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|