Here is some additional information that may help in identifying my clutch
master cylinder issue.
I have noticed that if I remove the cap from the reservoir and then slowly
push the clutch pedal in, I get absolutely no resistance on the pedal all the
way to the floor and the fluid in the reservoir climbs. However, if I push
the pedal at a rapid rate the fluid says level and I get more resistance in
the pedal.
I am assuming that there is an issue with one of the seals installed with
the repair kit?
Ken
CF55382
************************************** Get a sneak peek of the all-new AOL at
http://discover.aol.com/memed/aolcom30tour
|