Kevin:
I agree. Setting aside any serious thoughts is a big help when
working on my TR6 =:-o
I used Permatex Hylomar when installing the diff gasket. My diff
does not leak a drop.
Vance
-----Original Message-----
From: owner-6pack@Autox.Team.Net [mailto:owner-6pack@Autox.Team.Net] On
Behalf Of Kevin McNelis
Sent: February 12, 2007 7:38 AM
To: 6pack@autox.team.net
Subject: My magic TR6!
<snip>
All seriousness aside, I'm sure it is dry now. So, several questions:
What
is the most likely source of the leak? Since I'm gonna remove the whole
hypoid carrier, and replace all the seals, it doesn't really matter, but
I
would like to know what areas to pay special attention to. Do I buy
everything Moss sells on the Diff page that says "Seal" or "Gasket"?
I'm
also gonna go with the poly bushings.
<snip>
As always, much thanks to all.
Kevin
|