| To: | "Triumph 6 Pack" <6pack@autox.team.net> |
|---|---|
| Subject: | Re: brake bleeding--pdwa |
| From: | "John North" <johncnorth@gmail.com> |
| Date: | Sat, 18 Nov 2006 23:10:10 -0500 |
You can center the PDWA by pulling the switch and poking in there with an awl or similar. There is no brake fluid in there... Just get the awl in the slot in the middle and lever the plug over to the center. John North On 11/18/06, Colin Thom <colinthom@shaw.ca> wrote: Can I pull the switch off the PDWA and center > the shuttle manually, or is that chamber now full of brake fluid that > will promptly leak all over my nice clean engine compartment? > Thanks in advance. colinthom@shaw.ca |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Lucas vs Petronix Coil, Mike Pisani |
|---|---|
| Next by Date: | SPAM on Triumph e-mail list, and Truimph newsgroups, jhaeg |
| Previous by Thread: | brake bleeding--pdwa, Colin Thom |
| Next by Thread: | RE: brake bleeding--pdwa, Navarrette, Vance |
| Indexes: | [Date] [Thread] [Top] [All Lists] |