On closer inspection, the connection post on the solenoid has broken
off. I guess I must've gotten a little rough on it at some point.
Any body give any chances on a repair, or am I looking at a new
solenoid?
John North
On 10/30/06, johntempe8@att.net <johntempe8@att.net> wrote:
>
>
>
>
> John,
>
>
>
> Check the solenoid wire. If you haven't hooked it up it may not energize
> and move the gear forward. It also may be "gone". I can't recall if you
> don't hook up that little wire to the slip on connection if that causes your
> symptoms.
>
>
>
> John
>
> 71 TR6
>
> -------------- Original message from "John North" <johncnorth@gmail.com>:
> --------------
>
>
> > Just finishing up work on rear crank seal and clutch (among other
> > things), and I was looking forward to a little drive, but... The
> > starter turns just fine but doesn't engage the flywheel. I suppose I
|