Hi everyone, I have a Goodparts GP2 Cam and roller rockers and a few
days ago installed the external oil feed line as recommended by Richard
Good. It does seem to quiet the valve clatter, but took it on the
highway for about an hour today, and after I noticed oil dripping down
the evaporative canister. The oil level dropped about 3/4 quart and I
refilled it. Then, on the way back, the motor started to stumble on
uphill grades. Im assuming I was sucking quite a bit of oil through the
carbs. Should I get rid of the line, or try to cut down the flow some
way. Anyone else with roller rockers run into this? Thanks for any
advice. John Mitchell 76 TR6
|