Tim:
When 1 and 2 are on the rock, your crank should be at 0 degrees
according to your damper timing marks.
If you jumped a tooth, you will be off by at least 10 degrees (12 to be
precise).
Vance
-----Original Message-----
From: owner-6pack@autox.team.net [mailto:owner-6pack@autox.team.net] On
Behalf Of TIMOTHY VESELY
Sent: Saturday, August 12, 2006 8:15 AM
To: 6pack@autox.team.net
Subject: timing chain
Hi Guys
Long time lurker here. I think my timing chain jumped a tooth or two.
When 11
and 12 are on the rock 1 and 2 are tight and when 1 and 2 are on the
rock 11
and 12 are tight does this sound like my chain jumped? My 76 tr6 was
running
fine on a short trip (10 miles) it sat for about 4 hours. when I started
it it
would idle but no power.
thanks Tim
|