I would pull the hose off that leads to the firewall and check to see if the
pipes are plugged. Mine were when i first got the car.
Also check to see if the water heater valve is opening up.
Al Salvatore
76tr6
----- Original Message -----
From: "Eric Henningsen" <ehenningsen@triad.rr.com>
To: <6pack@autox.team.net>
Sent: Tuesday, October 11, 2005 9:14 PM
Subject: No heat from heater
>I am trying to troubleshoot minimal heat coming from the heater unit on a
>76
> TR6. Duration restoration the heater assembly was completely dismantled
> and
> reworked, blower works fine and heater core is in good shape, so I am
> assuming the issue is coolant flow from the engine to the heater core -
> either an air pocket at the heater valve or possibly poor coolant flow
> from
> the engine block. I have tried elevating front end and running system with
> radiator cap removed, no success. Suggestions for remedies or tests would
> be
> appreciated.
>
> Thanks,
> Eric
> 76 TR6 BRG
|