John:
I can't imagine that it is that critical. A good
wheel bearing grease should do the trick. I would not recommend
moly grease because it contaminates the oil requiring a change out
in short order. If you are overhauling the motor, then this is moot
as you will be changing the break-in oil in 500 miles anyway.
If you are merely replacing the rear seal, then wheel bearing
grease will do the trick and you can change the oil at the regular
interval.
I use Valvoline, but there are lots of good products out there.
Vance
-----Original Message-----
From: owner-6pack@autox.team.net [mailto:owner-6pack@autox.team.net] On
Behalf Of John & Allison Cyganowski
Sent: October 02, 2005 10:02 AM
To: 6pack
Subject: Main Engine Seal Grease
Hi All-
What Grease (brand/spec) should I use to pack the rear main engine seal?
John Cyg
CC52927LO
|