All the good top manufacturers sew short straps to the fabric at the
corners of the window (as original) which should have a female snap
attached which snaps onto the male snap on each side of the rear
bulkhead. If your top doesn't have the straps then I wouldn't buy from
the supplier again and your window will flop around at speed when
unzipped and the side windows are down.
Jim Davis
Fortson, GA
CF38690UO
i had a new vinyl top w/reflective strips and Z.R.W. installed on my TR6
about 3 years ago. I'd like to unzip the window, but don't know how to
properly hold the window when it's rolled down. My top doesn't have a
strap or anything to hold it down properly (which i have seen in an
illustration in the official driver's handbook). Is this something that
you have to custom install?
Ryan
71 TR6
|