Joe:
I have a '74-1/2. I swapped the brackets (inner and outer) and
left the orientation (notch direction) the same as the factory. This
gives me a very slight positive camber when the car is unloaded, and 0
camber with me in the car. I should mention that this is with freshly
rebushed trailing arms. I expect the car to settle slightly as the
bushings age a bit.
Vance
-----Original Message-----
From: owner-6pack@autox.team.net [mailto:owner-6pack@autox.team.net] On
Behalf Of Joseph Grant
Sent: Wednesday, January 21, 2004 8:37 PM
To: 6Pack
Subject: Rear control arm mounting brackets...
Yes, the brackets with the 'notches' on them. I have a '72 TR6 and on
mine, it had the three notch bracket on the inside with the notches
pointing
up. On the outside, I have one notch pointing up. I realize the
brackets
are different on some cars, but what orientation are you guys using and
what
combination of brackets?
Once again, any info would be greatly appreciated.
Joe
|