Alan And List:
I have to apologize for the Bad info. regarding the 4-40 threads it should
have read 6-32 with a washer. Terrible memory on my part.
as I thought about it, I kept thinking man that sure is small...are you
sure? So I had to pull down the side panel to get my peace of mind back.
once again I apologize
Brooks
-----Original Message-----
From: owner-6pack@autox.team.net [mailto:owner-6pack@autox.team.net]On
Behalf Of Brooks Bullock
Sent: Friday, July 25, 2003 1:25 AM
To: Alan; 6pack
Cc: triumphs@autox.team.net
Subject: RE: spring guide for door check strap/tr6
Alan:
Just to maintain the Original look, I used the new rivets but tapped the
ends for a 4-40 screw, used a magnetic screw tip in my finger tips and the
green low strength loctite thread lock juice.....after two years all is
still well.
Brooks
-----Original Message-----
From: owner-6pack@autox.team.net [mailto:owner-6pack@autox.team.net]On
Behalf Of Alan
Sent: Thursday, July 24, 2003 10:20 PM
To: 6pack
Cc: triumphs@autox.team.net
Subject: spring guide for door check strap/tr6
I need to install a new spring guide for the door check strap.
Question is how do you install the rivets that hold the spring guide in
place?
thanks
Al Salvatore
76tr6
/// 6pack@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|