6pack
[Top] [All Lists]

RE: Two TR250 issues

To: "'fiorentine003@earthlink.net'" <fiorentine003@earthlink.net>
Subject: RE: Two TR250 issues
From: Andrew Packard <apackard68@comcast.net>
Date: Wed, 25 Jun 2003 19:15:11 -0400
Were you implying that I'm dead if it's the "head casket"?  I have no 
overheating problems with the car.  Should that be a concurrent symptom?

-----Original Message-----
From:   Tony Fiorentine [SMTP:fiorentine003@earthlink.net]
Sent:   Wednesday, June 25, 2003 7:10 PM
To:     Andrew Packard
Subject:        RE: Two TR250 issues

"White smoke" sounds like head casket or cracked head.

Tony Fiorentine
fiorentine003@earthlink.net



> [Original Message]
> From: Andrew Packard <apackard68@comcast.net>
> To: 6pack (E-mail) <6pack@autox.team.net>
> Date: 6/25/2003 7:05:36 PM
> Subject: Two TR250 issues
>
> Hello list:
> Another brainteaser for the group.
>
> When I hit 70 mph on the interstate (that's freeway to the west coasters)
and ease off of the accelerator, there is a vibration that rumbles the
entire car.  It may be coming from the front right, but I feel the
vibration in the soles of my shoes.  When I accelerate again, the rumble is
mitigated, but still somewhat present.  Is it possible that my spindle nut
is a hair loose and is only apparent at higher speeds?  Unbalanced drive
shaft or a stub axle problem was my other thought, but it really seems to
come from that front R side.  Anyone want to lean out the window and put
their ear to the handle of a BA screwdriver and see where the vibration is
coming from?  Any thoughts are welcome.
>
> Issue number two is an unusual amount of exhaust smoke when I'm coasting
at 2500+ rpms.  In my rear view mirror I see white exhaust smoke coming out
and when I depress the accel. pedal again, a puff of white smoke comes out
and everything is back to normal.  I know I'm risking getting the response
of having to pull the engine and rebuild it all, but I guess I needed a
winter project to budget and schedule.  Thanks for the help on number two,
as well.
>
> Andy
> CD6521L
> Working on the Triumph tan now that the sun is finally shining.
> Baltimore, MD

<Prev in Thread] Current Thread [Next in Thread>