Hi John,
I presume you're describing the Pennzoil Syncromesh product. I've never
used it but there is quite a bit of info at this Pennzoil website.
http://www.pennzoil-quakerstate.com/techdata/l7_prodsheet_fs.htm
Good luck,
Jay Welch, Abington MA
Member, "Cape Cod British Car Club"
http://www.capecodbritishcarclub.org/
1973 TR6 driver
1971 TR6 project
===================
On Wed, 04 Jun 2003 11:25:46 -0400 ShewFamily@aol.com writes:
> Has anyone on the list had experience with a product made by Pennzoil
> and carried by Autozone that is a gear lube made for some GM and
> Chrysler manual transmissions? It does not have the designation
> GL-4, but it explains that it is specifically made for syncromesh
> transmissions and that it will not damage the copper or bronze parts
> as the GL-5 fluids will do.
>
> Thanks.
> John Shewmake
> '74 TR6
> Chattanooga, TN
|