From: Shane Ingate [mailto:hottr6@hotmail.com]
Sent: Thursday, February 13, 2003 10:26 AM
To: 6 Pack
Subject: TR6 pedal ratio, and TR250 "power bulge"
Shane, I have the Tiltons and balance bar [ and proportioning valve]. I
used .75 masters, have Toyota 4 pot calipers and .7r rear cylinders.
The pedel effort is substantial. It takes a lot of push to get it to
really grab [though grab it does]. I am putting thr 7/8 Morgan
cyclinders in the back before I finish this winters rebuidl. I have
also fixed the balance bar [it was stuck], so hopefully I can get it to
grab the rear brakes [the fronts went first even with the valve fully
open], then balance from there.
I will be most in hearing how the replacing the entire pedal box goes.
Do you have any idea what the stock ratio is.
Chuck
[demime 0.99d.1 removed an attachment of type text/x-vcard which had a name of
Chuck.Arnold.vcf]
|