6pack
[Top] [All Lists]

RE: dash knobs revisited

To: "'Fader, Hugh (H.O.)'" <hfader@ford.com>
Subject: RE: dash knobs revisited
From: Jim Davis <jamdav@woodward.com>
Date: Wed, 15 Jan 2003 10:12:56 -0600
I guess I will try TRF. I placed an order with them two days ago and out of
the 11 items ordered, six were placed on back-order. . . Very frustrating.

Jim Davis
1974 TR6 CF19738U
Fort Collins, Colorado

-----Original Message-----
From: Fader, Hugh (H.O.) [mailto:hfader@ford.com]
Sent: Wednesday, January 15, 2003 9:07 AM
To: 'Jim Davis'
Subject: RE: dash knobs revisited


Try Roadster Factory.

> -----Original Message-----
> From: Jim Davis [mailto:jamdav@woodward.com]
> Sent: Wednesday, January 15, 2003 9:30 AM
> To: '6pack (E-mail)'
> Subject: RE: dash knobs revisited
> 
> 
> I ordered knobs through Rimmer and was very disappointed with the poor
> quality.  The writing on the knobs was smeared and very 
> "cheap" looking.  I
> forgot what I paid but it was a lot for very little in return.
> 
> Jim Davis
> 1974 TR6 CF19738U
> Fort Collins, Colorado
> 
> -----Original Message-----
> From: Jim Davis [mailto:jdavis344@directvinternet.com]
> Sent: Tuesday, January 14, 2003 6:13 PM
> To: 'Andrew Packard'; '6pack (E-mail)'
> Subject: RE: dash knobs revisited
> 
> 
> My experience has been that Victoria British sells inferior products
> compared to TRF and even Moss. TRF sells the best quality, though they
> have stocking issues. If you are expecting quality parts, I would shop
> TRF before VB.
>  
> My $.02
> Jim Davis
> Fortson, GA
> CF38690UO
> CF37325U
> 
> 
> 
> More data on dash knobs:
> I just received my dash knob set for my TR250 from Victoria British.
> They were 3 for 5.  The design on the heater knob was not very crisp
> with the lines on one side blurring.  The rheostat knob was 
> not the same
> as currently on my car.  The dial-like design was about 1/2 
> the size of
> mine.  I have to wait until tomorrow to talk to customer service, but
> the woman who answered the phone was knowledgable and friendly.
> Hopefully I can get a better quality heater knob and the correct
> rheostat knob.  I'll update the list when I talk to VB.
> Andy
> CD6521L
> 
> ***
> The information in this e-mail is confidential and intended 
> solely for the
> individual or entity to whom it is addressed. If you have 
> received this
> e-mail in error please notify the sender by return e-mail, delete this
> e-mail, and refrain from any disclosure or action based on 
> the information.
> ****
> 

***
The information in this e-mail is confidential and intended solely for the
individual or entity to whom it is addressed. If you have received this
e-mail in error please notify the sender by return e-mail, delete this
e-mail, and refrain from any disclosure or action based on the information.
****

<Prev in Thread] Current Thread [Next in Thread>