Hi,
I currently have my differential out and at the shop for the placement of shims
to tighten up about 1/2" to 3/4" of "rotary play" (hope that's clear). It was
easy to get out with my standard exhaust system disconnected at the manifold
and off the hangers. It is pretty heavy though so don't let it fall on you!
In Canada, a replacement diff runs about $600.00 (that's $12.95 American,
Ha,Ha) but are a bit hard to come by. My mechanic suggests a rebiuld is the
way to go. My u-joints appear tight but I was experiencing "thunk" under power
so I hope this fixes the problem.
Ian Pappin '76 TR6
-----Original Message-----
From: Hugh Fader [mailto:hfader@usa.net]
Sent: Sunday, September 15, 2002 8:26 AM
To: 'Dave Massey'
Cc: 'triumphs'; '6pack'
Subject: RE: Whine in gearbox or differential?
> Well, the question is "is it getting any worse?" I drtove my
It doesn't seem to be getting any worse. But it sure is annoying.
> oil). But if it is caused by a failing pinion bearing it can go fast.
>
> Just how low were you in oil?
Hardly made a dent in the oil bottle to top it off. Made no difference in
the sound.
>
> In any case you might want to start looking for a spare
> differential and
> they are fairly easy to change (unless the custom exhaust is
> in the way).
I've already started looking. I have a stock exhuast, but it looks like it
has to be removed to get the differential out. Is that right?
Anybody out there have sources or tips for finding one? Jerry already told
me about Team Triumph.
>
> Cheers
>
> Dave
Attached are your doughnuts.
Thanks,
Hugh
[demime 0.97c removed an attachment of type application/octet-stream which had
a name of Doughnuts.jpg]
|