Tim, thanks for the tip on the Magnecor site - tons of good info...
<mc>
-----Original Message-----
From: Timothy Holbrook [mailto:tjh173@yahoo.com]
Sent: Thursday, June 13, 2002 8:54 AM
To: 6pack@autox.team.net
Subject: Fwd: spark plug wires
I just got a set of Magnecor wires from Moss. KV85, they are 8.5mm
wires. I would strongly recommend checking out Magnecor's website
(www.magnecor.com). It's very informative, I learned a lot about plug
wires, the facts and the myths. There are a lot of ads out there from
plug wire manufacturers, and it turns out that a lot of their claims
are BS. Anyway, Moss stocks KV85 plug wires for TR6 and TR250 precut
with the proper end fittings.
Tim Holbrook
1971 TR6
--- jay_welch@juno.com wrote:
> To: tr6nut@telocity.com
> CC: forzion@maine.rr.com, 6pack@autox.team.net
> Date: Thu, 13 Jun 2002 06:52:03 -0400
> From: jay_welch@juno.com
>
> Hi Hugh,
>
> Is that a pre-assembled set that you used or did you cut them to
> length
> and assemble. If precut, do you have the application and/or part
> number
> that you could share?
>
> Thanks,
> Jay Welch, Abington, MA
> 1971 TR6 Project, 1973 TR6 Driver
> 1989 Mustang GT donor car aching to be a FFR Roadster
> Member Cape Cod British Car Club @
> http://clubs.hemmings.com/capecodbritish/
>
>
> > I am currently running Crane 8.5mm wires on my TR6
>
> Hugh Barber
> Hollister, CA
> '73 TR6
Yahoo! - Official partner of 2002 FIFA World Cup
http://fifaworldcup.yahoo.com
|