Jim,
I used a an 8" wire wheel on a grinder for the body of the clutch M/C and a
buffing wheel to polish the
cap (since it's aluminium). Looks great!.
Jeff Johnson
76 TR6
At 06:59 PM 5/20/02 -0400, James Henningsen wrote:
>Howdy listers,
>I have a good used clutch master cylinder - perfect bore, but it looks
>like doody (dirt and wear) on the outside. I have wiped down with goof
>off but it didn't help, tried a little dremel tool buffing but it didn't
>work well. Any ideas on how to restore the outside to make it look like
>new. I have tried repainting before but the aluminum spray paint never
>"stuck" well. Any ideas would be appreciated!
>Thanks in advance!
>Jim Henningsen
>Kisssimmee, FL
>75 TR6
>80 TR7 & 8
|