Can the specs be measured at the pushrod with a dial indicator?
>Alan---The only way to know for sure is to pull the cam and indicate the
>degrees of duration and lobe lift. It may be that the PO took some
>liberty in describing the "S3" cam as a custom grind somewhere between
>the S2 and S4. (It could be done)
>
>The specs for these two can be found in the Comp Prep Manual.
>
>Dick T.
>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Brian Borgstede !
Distance Learning Engineer !
University of Missouri - St. Louis ! '68 Triumph TR-250
Phone: (314)516-6433 ! (or two or more)
Fax: (314)516-6019 !
Email: borgstede@umsl.edu !
|