Hugh,
When I need to raise the engine I use a floor jack with a piece of 2X6 on
the jack head.
Jim Davis
1974 TR6
-----Original Message-----
From: Hugh Fader [mailto:hfader@usa.net]
Sent: Friday, February 08, 2002 2:30 PM
To: triumphs@autox.team.net; 6pack@autox.team.net
Subject: Lifting TR6 engine for cam removal
Hello. I have decided I will indeed be changing cams on my TR6. I reviewed
the
shop manual procedures and found that the motor mount must be loosened and
the
engine raised a bit to slide the cam through the grille openeing. I
hestitate
to just put a floor jack under the oil pan. Anybody have other suggestions?
Thanks,
Hugh Fader
***
The information in this e-mail is confidential and intended solely for the
individual or entity to whom it is addressed. If you have received this
e-mail in error please notify the sender by return e-mail, delete this
e-mail, and refrain from any disclosure or action based on the information.
****
|