----- Original Message -----
From: "Dwayne Cooper" <dcooper@paciolan.com>
Subject: A couple of things...
| I'm still trying to get my '74 on the road and have come across a couple
| of issues:
|
| 1) I started rebuilding the carbs and in the process found out that the
| hex adjusting "cap" for one of my adjustable metering needles was
| stripped out. I was able to remove it with a little work and promptly
| ordered a new adjustable metering needle from Moss. Unfortunately, the
| new needle did not include the hex adjusting "cap". Does anyone know if
| these are available somewhere?
Hi Dwayne,
I assume you're reffering to the screw that both retains and adjusts the
metering needle.
The Roadster Factory had these in stock a few weeks ago. You should order a
new O ring also and a maybe a new retaingng clip. I believe Victora
British also stocks the screws. The Roadster Factory Part numbers are:
Metering Needle Adjusting Screw: ZEB20042
O Ring: ZEO19657
Clip: ZEB19995
Info on how to remove and replace the screw is in the last part of the
following note:
http://www.buckeyetriumphs.org/technical/Carbs/CarbsII/CarbsII.htm
Nelson Riedel
Granville Ohio
'68TR250, '70TR6, '76TR6
|