Re: Fwd: Toyota Release Bearing in TR6 (snipped)

[Jeff Johnson <mondolux@speakeasy.net>]

At 07:06 PM 9/4/01 -0400, StuBeatty@aol.com wrote:
>  Last fall I was told the problem was likely a loose pilot bushing in
>the flywheel. Sure enough when I pulled the tranny over the winter, the pilot
>bushing spun in the flywheel. Since fixing this problem, the clutch no longer
>sticks.

I'm curious as to how you solved the problem of a loose pilot bushing. I 
think I remember seeing a post about not allowing the pilot bush to spin, 
but I forgot what the solution was. Could you elaborate, please?

Thanks as usual,

Jeff Johnson
'76 TR6 CF50278U