Ryan,
I believe so. I used the Eastwood paint on the entire radiator, tanks
and fins. No problems. Apply it lightly to the fin area, not too
heavy.
Gary
'75 TR6
President, TRAC
www.toad.net/~gklein/TRAC/
>Date: Fri, 31 Aug 2001 14:33:19 -0700
>From: RPVanLuchene@lbl.gov
>Subject: radiator
>
>This weekend I'm going to take out the radiator - to flush it,
>straighten out the cooling fins and paint it. Also going to install
>some new green hoses. My question - when painting the radiator (I have
>black radiator paint from Eastwood), is it correct to paint the cooling
>fins or should I just paint the frame? The paint is supposedly thinner
>than other paints and it can withstand high temps (<250 deg).
>
>Cheers
>
>Ryan
>6/71 Sapphire
|