6pack
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Hose inlet on brake vacumn booster

from [dstauffa] [Permanent Link][Original]
To: 6pack@autox.team.net, triumphs@autox.team.net
Subject: Hose inlet on brake vacumn booster
From: dstauffa@csc.com
Date: Fri, 1 Jun 2001 11:02:44 -0700 
Listers,

Does anyone know how to remove that little plastic inlet on the brake
vacumn booster?  I would like to remove it and then reinstall it later but
have it point 180 degress from it's current angle.

Thanks,

Dave
Ramona, Ca
1970 TR6
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: .75 wheel cylinders (long), Nelson Riedel
Next by Date:  RE: Hose inlet on brake vacumn booster, Peter Zaborski
Previous by Thread:  Re: .75 wheel cylinders (long), Nelson Riedel
Next by Thread:  RE: Hose inlet on brake vacumn booster, Peter Zaborski
Indexes:  [Date] [Thread] [Top] [All Lists]