The Toyota number and KOYO RCT52S both cross to NAPA bearing number N3075
and is about $50. It's listed for Landcruisers from 75 to 87. The dimensions
are 2.0472" inside diameter, 3.622" outside, and 1.0236" wide.
When I get a chance I will try to cross the clutch disc and pressure plate
numbers too.
Rick Patton
75 Delft TR6 w/ noisy throw out bearing
Brunswick, Maine
>Date: Sat, 5 May 2001 13:42:19 EDT
>From: StuBeatty@aol.com
>Subject: Fwd: Toyota Throwout Bearing
>
>The release bearing is now in the car so I can't really double check the
>number on the bearing unless I take the tranny out again ( this would be the
>6th time in 5 years, I'm really good at it). I did write all the part numbers
>down in case some one wanted this information or for reordering parts in the
>future.
>The pressure plate is a SACHS TYP MF 215 90 3082 100 041 4 16.0
>The drive plate is a BORG & BECK AP ASSY34F HB8793Q
>The release bearing is a KOYO RCT52S.
>Unless my dyslexia is flaring up again, these should be the correct prat
>numbers.
>By the way this is a great set up, it's the nicest clutch I have run in this
>car in the last 18 years. I recommend it.
>
>Stuart Beatty
>Belleville Ontario
>76 Carmine TR6
|