More on Overdrive troubles

[Bernard Robbins <brobbins@wlg.nec.co.nz>]

Hi Tim, 

This may sound a bit silly, but check the fore and aft movement of your OD
column switch. I had a similar problem with the od dropping out randomly.
It turned out to be the lever hinge pin in the OD switch was badly worn. My
OD switch has has very little movement now (2-3mm at the outer end of the
lever).

Hope this helps.


Regards


Bernard Robbins

NEC New Zealand Ltd
Network Solutions
P.O. Box 1936
Wellington

Ph      (04) 381 6274
fax     (04) 381 6284
email   brobbins@wlg.nec.co.nz