Sounds like your metering needle is stuck. Take the carb off, replace the
metering needle with a grose jet (available from any of the big 3) and put
it back together, remembering to set the float height carefully upon
reassembly.
Tim Holbrook
1971 TR6
>X-PH: V4.1@f05n09
>From: "Frank T. Axelrod" <Frankster@mindspring.com>
>To: "'6pack@autox.team.net'" <6pack@autox.team.net>
>Subject: flooded carb
>Date: Wed, 12 Apr 2000 18:40:39 -0500
>X-Mailer: Microsoft Internet E-mail/MAPI - 8.0.0.4211
>Sender: owner-6pack@autox.team.net
>Reply-To: "Frank T. Axelrod" <Frankster@mindspring.com>
>
>i seem to be having difficulty with one carb. flooding to the point where
>fuel is leaking from the float chamber (through the gasket). i have
>replaced the gasket but can't seem to stop the "waterfall" any suggestions
>frankster@mindspring.com
>
|